Yes it is better then stock based of the center port of the mufflers exhaust.
Wider inlet.
Before!
After!
Review and vendor provided by:
"Nationalwide Motorized Bicycle forum group."
Vendors link and profile:
https://m.ebay.com/itm/Chrome-Banan...ycle-Engine-/263144351741?txnId=2193411983016
https://m.ebay.com/seller?sid=mestorty-2&nav=ORDER_DETAILS
"New banana pipe w/ gasket for $22.00 from eBay vendor
My overall opinion before test run is as shown in photo:
photo 1: It has decent stick welds to prevent leaks around the exhaust port.
Photo 2: decent finish but shows a little of scratching during shipping or manufacturing process which is not really something to argue about cause that will buff right on out.
Photo 3: the collar stick weld is a bit sloppy but I know it will hold up as I've seen worse stick welds "like my own for one lol"
Photo 4: tip is a bit heavy/globby from the stick welding process but effective as for has chrome chipping on the tip and the gasket on the last photo will need to be opened up a bit more but this pipe exhaust port how ever is way wider than the stock pipe.
All though it's just the lip of the tip which will be usually covered in oil anyway I'd give this product a 3-5 on a 5 point scale and a 6.5-10 on a 10 point scale.
Stay tuned for test run..."
Link to nationalwide motorized bicycle facebook group forum:
https://m.facebook.com/groups/153362885297629?ref=bookmarks
Thanks
Wider inlet.
Before!
After!
Review and vendor provided by:
"Nationalwide Motorized Bicycle forum group."
Vendors link and profile:
https://m.ebay.com/itm/Chrome-Banan...ycle-Engine-/263144351741?txnId=2193411983016
https://m.ebay.com/seller?sid=mestorty-2&nav=ORDER_DETAILS
"New banana pipe w/ gasket for $22.00 from eBay vendor
My overall opinion before test run is as shown in photo:
photo 1: It has decent stick welds to prevent leaks around the exhaust port.
Photo 2: decent finish but shows a little of scratching during shipping or manufacturing process which is not really something to argue about cause that will buff right on out.
Photo 3: the collar stick weld is a bit sloppy but I know it will hold up as I've seen worse stick welds "like my own for one lol"
Photo 4: tip is a bit heavy/globby from the stick welding process but effective as for has chrome chipping on the tip and the gasket on the last photo will need to be opened up a bit more but this pipe exhaust port how ever is way wider than the stock pipe.
All though it's just the lip of the tip which will be usually covered in oil anyway I'd give this product a 3-5 on a 5 point scale and a 6.5-10 on a 10 point scale.
Stay tuned for test run..."
Link to nationalwide motorized bicycle facebook group forum:
https://m.facebook.com/groups/153362885297629?ref=bookmarks
Thanks