Fall Tune-up Time!

[DAMIEN1307]

is that what you usually have to do as clutch wears or do I need to turn it clockwise to tighten it up?

You go clockwise to tighten, counter clockwise to loosen, "righty tighty, lefty loosey"...be sure to only go one notch at a time...Complete start to finish clutch adjustment in "tutorial" below.

2Stroke clutch always either engaged or disengaged

Hello so i'm having some problems, after having to change some parts in my clutch, including clutch pads and etc, the clutch is always disengaged for whatever reason, i've tried adjusting the clutch spring that is inside, wont help, ive tried adjusting the cable also wont help, any more ideas...

motoredbikes.com

 

[GW's Motorized]

It's amazing what an hour or 2 of maintenance can do for a machine

 

[graggy]

You go clockwise to tighten, counter clockwise to loosen, "righty tighty, lefty loosey"...be sure to only go one notch at a time...Complete start to finish clutch adjustment in "tutorial" below.

2Stroke clutch always either engaged or disengaged

Hello so i'm having some problems, after having to change some parts in my clutch, including clutch pads and etc, the clutch is always disengaged for whatever reason, i've tried adjusting the clutch spring that is inside, wont help, ive tried adjusting the cable also wont help, any more ideas...

motoredbikes.com

So you backed of on the nut meaning that the clutch was too tight?

 

[DAMIEN1307]

So you backed of on the nut meaning that the clutch was too tight?

YEP...I only had to back it off just one notch...If you follow closely my little "tutorial", it explains in detail just how to get it perfect.