grips w/ most kits too hard / not comfy.

[Skyliner70cc]

Bully,
You just slice the old grip off of the throttle and remove it. You then spray some windex or soapy water on the throttle and slide the foam grip on it. If you can't do that, you can easily purchase a new plastic throttle sub-assembly.

 

[Ghost0]

I just went to my nearest motorcycle shop and bought a pair of good old Scott motorcycle grips. They already are designed for the 2 different sizes. I did have to mod my plastic throttle as it was one of the old narrow ones. I just extended it using a piece of pvc tube to the correct length. Not quite as squishy as some of the bicycle grips out there but better than the stock ones. Front suspension helps too.

 

[loquin]

I wouldn't use hair spray - it's mostly shellac, and it would end up 'gluing' the grips in place.

 

[sparky]

You could also get a thumb throttle (I just used a brake lever cut in half, but I believe Staton sells more professional lookin' ones) and then use any regular cushy handle grips you'd like.

 

[bully]

i like the twist throttle too much to give up.

vroom, vroom and what not