New beginning

[HumanPerson]

@bakaneko just did some cells didn't he?

 

[bakaneko]

I think i found somethuing similar on alibaba lol


Just the dimensions are not quite right...why are these pouch cell batteries hard to find then?

LiPolymer LiFePO4...am getting cornfused!

3.2v is going to be LiFePO4 ; i havent seen many pouch LiFePO4 cells tbh. you need a LiFePO4 bms for 3.2V nominal. its different than the normal bms.

 

[bakaneko]

@bakaneko just did some cells didn't he?

also, once you wire the balance leads, you can test the wiring with a voltmeter before plugging into the BMS to make sure you get it right and dont fry the BMS.

 

[HumanPerson]

So any 3.2v pouch cell will be the correct amps/ah?

This battery is the 48v 1000w 20ah LiFePO4 battery.

I found some 3.2 pouches but have no idea what the amp/ah is.
What i found strange is the guy at batteriesPlus said they had no idea what that pouch goes to LOL

I just hate to mess the whole battery up beyond repair

 

[HumanPerson]

All of the other pouches look good, no signs of swelling or bursting and they all check out as far as voltage.

 

[Frogslayer]

You'll need the same capacity cell.

 

[HumanPerson]

I seen the 3.2v 10ah pouches but have no idea if that is it or not

 

[HumanPerson]

You'll need the same capacity cell.

I've no clue what ya mean Brother..

 

[Frogslayer]

Are there 16 cells total in your battery? If so then you have 20ah packs. This is what I'm thinking you'll have. 16s1p configuration. Unless there are 32 10 amp hour packs 16s2p?

 

[HumanPerson]

Are there 16 cells total in your battery? If so then you have 20ah packs. This is what I'm thinking you'll have. 16s1p configuration. Unless there are 32 10 amp hour packs 16s2p?

Yep it's the 16 pouches. Not lookin at it at the moment but if i recall correctly it said 16s 1p on the battery pouch.