Will a pull starter ruin my magneto?

[Motab]

I'm planning on attaching a pull starter to my 80cc engine, many people have told me that it will ruin my crankshaft/magneto and ill have to replace it or get a new engine all together.

Anyone that has been in this hobby for a while, and anyone that has put a pull starter on their engine, do you recommend it?

 

[GW's Motorized]

From what I have read the pull starter stripps the crankshaft threads. Replaing the crank is alot of work if you are trying to get it fixed and ride the next day. I personally wouldn't do it.

My bt80 has a pull start, but that is designed to have one. The pull chord however broke and I haven't used it since.

 

[Motab]

I figured i wont use a pull start, soo many cons outweigh the pros, sticking to petal starting

 

[Wyvern]

I figured i wont use a pull start, soo many cons outweigh the pros, sticking to petal starting

Yeah, it's really only an option if you are unable pedal start for some reason.

They take work to get working correctly.

 

[ImpulseRocket]

Skip the pull start. Get a good center stand to replace the normal kick stand so you can get the rear wheel off the ground and you can pedal start it while stationary just like a kick start.

 

[Chainlube]

I figured i wont use a pull start, soo many cons outweigh the pros, sticking to petal starting

If your bike is in good tune, you don't even need to pedal. Just run along and jump on, pop the clutch and ride away.