dchevygod
Member
- Local time
- 8:17 AM
- Joined
- Mar 7, 2011
- Messages
- 473
I got one and bolted up just fine but... as soon as I got it started I could tell the clutch had issues. It had backed off the bell and bent it more than it was when I got it. And yes out of the box the bell was obviously warped. Im just going to get one of the $25-$35 complete housings with a bell and bearing. Cheap fix but blah. Also the motor is way further out than it needs to be. I think even with adding another cover to the motor the redesign should bring it closer to the spindle and mount. The bell that's on it is way to big and it sucks anyway. I guess the bad engineering just forced me to do something I wanted to anyway. The center of ballance is effected noticeably with the motor that far out. Im sure the little im going to pull it closer to the wheel should help tremendously. Any feed back would be appreciated. Thx