on a wc-1 whizzer
- Thread starter michael jatcko
- Start date
Michael is looking for a WC-1 copper head gasket, can you help him?
maybe @mason_man can help you get one
The bolt pattern is different between the NE-5 and WC-1
I only got NE-5
GW's Motorized
Well-Known Member
I was thinking you could share with him.how you make them incase he wants to make some
GW's Motorized
Well-Known Member
I was thinking of Wrench's way. He posted how he did it a while ago, but I couldn't find it.
Make Copper Head gaskets
Howzit Everyone, Making your own Copper Head Gaskets saves a lot of money$ and now you can match the combustion chamber exact. Cutting and drilling thin copper sheet takes some thought and skill. I'll explain in order what works for me and the basic tools I use. I use .016 th" thick copper sheet...
motoredbikes.com
Gasket Making 101
Howzit Everyone, $SAVE MONEY$ Gaskets made easy. Don't reach for the razor blade. Grab your 8oz alignment tool (ball peen hammer) and tap it out, Lightly tap gasket around the edges. As you tap out the bolt holes (or punch) put bolts in to help keep gasket aligned. The 1/32" rubber fiber sheet...
motoredbikes.com
Making Whizzer Exhaust Gaskets
I use Mr Gasket Ultra Seal Graphite with a steel mesh center. 10" x 10" sheet costs $15 and I can make 25 gaskets It can be a little tricky to cut out. Here is a method I use and the exhaust gaskets turn out nice. I clamp the gasket sheet between 2 pieces of wood a 1/8" piece of panel board on...
motoredbikes.com
