H
Hot Dog Piggy Tails
Guest
Krylon
Enamel Clear coat worked ok but to get it a harder seal I have to change its drying Environment temp from hot (75 - 85 deg Farenheit to cold 45 deg 5 hrs to 70 deg for 4 hrs then I uasually let it set in the shop an hr or two to naturalize. I have had gas on many weeks and no problem.. Fact of the matter I used Acrylic in these same steps of curing Temp and Its pretty good also. I use two coats(at least ) over primer then two to 4 coats of Clear and do the 1 hr and 24 hrs between as I have more than one bike usually or something Im doing and this works. the Enamel is WAY Shinier than the Acrylic. I think the Top coat Hardens the Lower coat every time it gets thinned. The Enamel is Superior as it goes on thicker. Don't test its curing time..this eliminated Poarse Surfaces.
Enamel Clear coat worked ok but to get it a harder seal I have to change its drying Environment temp from hot (75 - 85 deg Farenheit to cold 45 deg 5 hrs to 70 deg for 4 hrs then I uasually let it set in the shop an hr or two to naturalize. I have had gas on many weeks and no problem.. Fact of the matter I used Acrylic in these same steps of curing Temp and Its pretty good also. I use two coats(at least ) over primer then two to 4 coats of Clear and do the 1 hr and 24 hrs between as I have more than one bike usually or something Im doing and this works. the Enamel is WAY Shinier than the Acrylic. I think the Top coat Hardens the Lower coat every time it gets thinned. The Enamel is Superior as it goes on thicker. Don't test its curing time..this eliminated Poarse Surfaces.