solitus3989
Member
chinese 2 stroke engine from powerkingshop on ebay. installed 2 weeks ago.
yesterday, i replaced the spark plug with an NGK-bh6s and a spark plug i found in my garage.
when i hold the clutch in today, it idles very high. much higher than when im actually cruising. when i hold in clutch, it sounds like im WOT when im 0% throttle.
also, if i leave clutch engaged, at 0% throttle, it cruises along at 10mph.
*confused*
problem with the clutch? does the clutch just need tightening?
also noticed boot on top of spark plug got very hot. never touched the boot after riding. normal or bad?
should i put my old boot/plug on?
yesterday, i replaced the spark plug with an NGK-bh6s and a spark plug i found in my garage.
when i hold the clutch in today, it idles very high. much higher than when im actually cruising. when i hold in clutch, it sounds like im WOT when im 0% throttle.
also, if i leave clutch engaged, at 0% throttle, it cruises along at 10mph.
*confused*
problem with the clutch? does the clutch just need tightening?
also noticed boot on top of spark plug got very hot. never touched the boot after riding. normal or bad?
should i put my old boot/plug on?