DAMIEN1307 Moderator Staff member Local time 9:04 PM Joined Jul 23, 2020 Messages 14,328 Location Alamogordo, NM, USA Aug 1, 2021 #11 Regalgse00 said: I fixed it. Thanks everyone. Click to expand... For the sake of other readers who may benefit from your fix, could you tell us just what was wrong and how you fixed it...thanks...DAMIEN
Regalgse00 said: I fixed it. Thanks everyone. Click to expand... For the sake of other readers who may benefit from your fix, could you tell us just what was wrong and how you fixed it...thanks...DAMIEN
R Regalgse00 Active Member Local time 10:04 PM Joined Jul 9, 2020 Messages 289 Aug 1, 2021 #12 Well I had actually pulled the whole clutch shaft out cause I was putting in new American bearings and seals in and when I reassembled the bearing wasn’t pressed onto the shaft far enough.
Well I had actually pulled the whole clutch shaft out cause I was putting in new American bearings and seals in and when I reassembled the bearing wasn’t pressed onto the shaft far enough.