EZ Motorbike Stickers

Discussion in 'Dealer Advertisements' started by azbill, Apr 2, 2011.

  1. azbill

    azbill Active Member

    I now have high quality EZ Motorbike logo stickers for sale

    They are 3mil adhesive backed vinyl with a clear laminate to protect from scratches and make them gas resistant

    They are so thick, my daughter thought they were fridge magnets !!! LOL
    I would estimate they are as thick as 2 business cards or so !

    They are 3" x 6" and will fit just fine on the stock peanut tank
    I put 1 on each side of my gas tank and 1 on the rear of my helmet to show they can handle complex curves

    They are priced at $5/sticker mailed to you !!!

    Please contact me via e-mail so as not to clog up my message box


    PS<<<I tried to post in the vendors forum, but it wouldn't let me
    Last edited by a moderator: Dec 18, 2015

  2. azbill

    azbill Active Member

    Thank You to the nice mod who moved this thread for me :):):)
  3. srdavo

    srdavo Active Member

    You're Welcome.
  4. ibdennyak

    ibdennyak Guest

    Heh heh heh, Dav0 never sleeps. Just when you least expect it......there he is. :grin5:
  5. RdKryton

    RdKryton Active Member

    I got mine this week and they are great. Very high quality. You will be very happy with them. As soon as it warms up enough they will go on the fuel tank.

  6. KilroyCD

    KilroyCD Active Member

    Likewise. Mine might go on this weekend.
  7. azbill

    azbill Active Member

    glad you guys like them :):):)

    a word of advice,,,
    I was told to clean whatever they are going on with rubbing alcohol

    if going on a tank, it might help to warm them with a blow dryer to be more pliable
    (they are pretty thick, I sat mine in the desert sun before applying to my helmet)
    Last edited: Apr 24, 2011
  8. KilroyCD

    KilroyCD Active Member

    Thanks for the tip, Bill. I was going to clean it with ammonia, but I'll use the alcohol instead. Also, I was going to use the old trick of applying it with a film of mildly soapy water underneath to allow me to work out any air pockets. I have done this with adhesive-backed decals before with great success. It normally just takes a day or so to set properly, but I'm wondering if the extra thickness of these will have any bearing on that.
  9. azbill

    azbill Active Member

    I am not sure,,,,they do stick very well,,,
    positioning it on the helmet was a PITA to get it centered ;)
  10. Quenton Guenther

    Quenton Guenther Motored Bikes Sponsor

    Hi Bill,

    Thanks! The stickers are the best I have ever seen. They are thick, clear, and look to last forever. I don't know how you managed to aquire the "super" stickers for such a low price, but thrilled you did.

    Have fun,
  11. azbill

    azbill Active Member

    thanks for all the nice words :),,,
    the guy who makes them has a daughter in my granddaughter's kindergarten class,
    where I volunteer 2 days a week

    she likes 'Mr Bill', so her dad gave me a very good arrangement on them :)
    I just pass the good deal along;)
  12. Quenton Guenther

    Quenton Guenther Motored Bikes Sponsor

    Here are the stickers on my current proto-type test bike.

    Getting ready to start second session testing on the 2 speed and HF motor, and these stickers just add the final touch to the package.

    Have fun,

    Attached Files:

  13. azbill

    azbill Active Member

    I finally have a website !!! (EZM)

    after seeing a few comments on people having difficulty finding what is available from EZM, as well as pricing,
    I made a website (not the best, but it's a start ;))
    (I'm a newbie at it, so any advice or criticism is welcome)

    I have a link on my "about" page back to here, so I hope I am OK with this post

    EZ Motorbike of Fountain Hills

    I added this to my sticker thread because I couldn't make a new thread :(
  14. Quenton Guenther

    Quenton Guenther Motored Bikes Sponsor

    Hi Bill,
    Fantastic web site!

    Have fun,