Looking for a Sportsman Flyer Engine Mount Chinese

[Hoodoo]

Looking for the Sportsman Flyer bolt on engine mount for the Worksman drop loop frame. In a bit of a hurry, have an event May 6 and want to have my Flying Merkel tribute ready so looking for a short cut. The Flying Merkel had a cool banana like oil fuel tank and replicating that with a lower faux frame piece. But would like to get a pre-built motor mount so avoid all the fitting hassles. The website is old and unresponsive to emails and Pat isn't returning my calls.

 

[Wrench]

By May 6 you should be able to fab that engine mount, You can do it.

Copy Sportsman, I see alot of pictures of that mount on their site,

 

[darwin]

80cc 66cc 49cc OCC Chopper Mount Gas Motorized Bike Engine 2-stroke | eBay

49cc 66cc 80cc Chopper Mount OCC Gas Motor Bike Engine 2-stroke. Or, you can buy this style as it works well, but you’ll have to drill out the holes for the bigger studs.

www.ebay.com

CDHPOWER Universal Motor Mount 1.5" (Golden) for 2 Stroke Bicycle Engine Kit | eBay

(3): Compatible with 1.5" to 2" stud spacing and suitable for front mount bolt 8mm only; For 66cc/80cc and 48cc 2-stroke bicycle engines Universal Mount for Bike Motors. 2):Compatible with 1.5" to 2" stud spacing and suitable for front mount bolt 8mm.

www.ebay.com

Gold one use flats for spacers with holes drilled if needed.

 

[Wrench]

Part of the OCC mount it is kinda like the SF mount, it'll work with some fabrication, It's a beginning

SPORTSMAN FLYER – SPORTSMAN FLYER MOTORBIKES