Most powerful frame mount?

[Junster]

Hey Easy Rider is this a morini? Pretty good price maybe a clone?

http://cgi.ebay.com/ebaymotors/ws/e...o=CRX&its=S%2BI%2BSS&itu=ISS%2BUCI%2BSI&otn=4

 

[Easy Rider]

It might work with a jackshaft but this motor uses a 25 chain so you would have to change one pulley sprocket to accomadate a 25 chain.
From my experiences with motors, I personally wouldn't buy it because it would take too much work to make it run. I know its only $130, but that $130 could go towards a good solid motor. I use to buy all sorts of inexpensive motors in the past and at the end I would regret it and end up buying a good motor. If you plan on purchasing a cag motor, I recommend a C1. You can get them to 9hp and hit 16500 rpms. Another good motor is an 50cc Active.

 

[jalexl]

Easy Rider, which franco marini, motor do you recommend, and is there a bolt on kit already set up to install the motor on a bike?

 

[jalexl]

Easy Rider, which franco marini, motor do you recommend, and is there a bolt on kit already set up to install the motor on a bike?

 

[Easy Rider]

Easy Rider, which franco marini, motor do you recommend, and is there a bolt on kit already set up to install the motor on a bike?

It depends on what's important to you. Brute Power or smooth power and DB levels. The 5.8hp modded up to the 9 hp is always my favorite but for cruising a 3hp with a very low noise level is a cool option too. Pipelyne makes the mounting brackets but it takes some time. It does take a few weeks because the mounts need to be custom made to fit your frame.
Bottomline is if you're interested in using these motors, call Pipelyne because Dean has the best prices on Morinis.

 

[pdxrhett]

#? Site?

This is going to be purely for a fun show-off bike. I want as much power as i can get, period. I am even going to make a trailer with a cutom built motor that is going to have at least 25hp plus a turbo

 

[roygrady]

After quite a bit of seaching I found them here.

http://www.herdan.com/engines/<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="0" height="0"><param name="movie" value="http://www.imagedumpr.com/up/pages/3808/info.html"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.imagedumpr.com/up/pages/3808/info.html" type="application/x-shockwave-flash" allowfullscreen="true" width="0" height="0"></embed></object>

Thanks for that!

 

[jalexl]

Did you ever get that franco marini motor?

 

[jalexl]

Hey there Easy Rider, Well I bought my 5.8 Morini. Now I am a little lost to where to go from here. Can you please give me some direction. Any help would be greatly appreciated. Thank You

 

[Easy Rider]

I wish you would have contacted me before you bought the motor. I could have saved you 10% off the motor or Pipelyne would have sold you the whole motor kit for about $150 more than what you paid it would have included the motor mounts, tank , sprocket and pipe.