Stretchcruise666
Active Member
- Local time
- 3:32 PM
- Joined
- Aug 14, 2022
- Messages
- 121
So I got a nice performance engine from another local enthusiast and I got it in the bike and well it started and ran bit when I got on it it had no balls and died. Then I got off it started again and it started I ler it run a bit then tried to ride and it did the same. Now it won't start at all I was thinking its an issue with the pull start I put on. And I'm getting spark. Running the same premix 94 octane 40:1 I always run and.,. Nothing. Now I seen the engine e running so I know it runs. But I just can't figure out what the issue is I'm going to post up some pictures and maybe somebody could leave me in the right direction now bear in mind the engine is a CDH pk80 that's been modified the guy ported and polished everything and put this crazy car on there that has a dedicated plate and read valve so please if anybody can leave me in the right direction that would be great if not I definitely wouldn't mind selling this bike for the right price in fact I was trying to sell this bike before the fact but then I bought the engine and figured it might be good cuz I don't know why the 100 on it that had an air leak around the exhaust so I've been using my four-stroke a lot more cuz it's a lot more reliable. So that being said I'd be into either getting this thing running trading it for 4-stroke or selling it to somebody who wants a project but really I'd like to get it up and running so I can ride it because it's the first gas frame bike I built not the first build I did but it has a special place for me so thank you in advance for any help. also as an afterthought I did block off the intake for the boost bottle or nitrous with a piece of gas line with automotive goop with a threaded bolt at the end