rocksolid motors

[Jefro50cc]

Heck if im gonna pay 352 dollars for a china girl motor. I' will walk first they all made in china using pot metal not any difference in any of them except the name. And the name dont make them run any better. It depends on how well you break them in and how good you are at replacing with quality hardware and thats it. I got a 49cc bgf motor i bought 3 yrs ago and it still runs. Thank you very much when u break them in. Dont gun them dont wot them add a little extra oil to gas. And after break in then use the amount of oil they require for break in as your normal amount . And remember these ARE NOT harleys they are
PEDAL ASSIST MOTORS. And should be run as such and for 352 dollars you can find a good motor setup from dax or statton or if you are lucky find you a good used moped ...

50cc HP Stage 2 Engine: Dellorto type flat slide racing carburettor, Inlet manifold porting, Exhaust porting & modifications, Billett alumium performance cylinder head, Accelerator cable to suite, MSD terminal, lead & boot, All bolts are replaced using high tensile Allen key type, Loctite 243 thread locker used, Clutch adjusted to ensure right setting, Carburettor fitted to manifold, Carburettor idle screw adjusted, individually stamped identification with engine builder & numbered for ID.

There's nothing wrong for paying for quality.

 

[Jefro50cc]

And my mates been talking to some one on here and they have had a rock solid engine stock 50cc, not hp2, an he was saying he has never touched his engine it's never missed a beat and has run fine for him Riding to work and bak everyday for two years.

 

[wbuttry]

still a china girl no matter how you put it