I have attempted to obtain similar results a different way. Perhaps I can bring an idea up now without deflecting your nitrous boost question. Any dinker who has attempted to add a small electric blower to the intake of an HT engine probably ends up with the same results. No matter how much or little blower boost you add, the gas supply shuts down and the engine stops firing. The idea was to provide the engine with a virtual sea level supply of air as a temporary boost or in general. I did not take the idea to the next level; but the solution was apparent. In the absence of a fuel pump, the virtual sea level air pressure would also have to be applied to the surface of the gasoline in the tank. So far, all this could be done without adding a lot of complexity to the bike. The only problem preventing me from finishing off the idea was the complexity needed to achieve certainty that a engine back fire would not make it to the gas tank. As a test I am certain virtual sea level would work and probably have the desired results but not be worth the risk of maintaining on the bike because of the back fire problem. In my opinion, if someone has not figured out this mod by now, it will not be long and it will be out there. The booster provides a use for the kill button since the CDI is on a switch.
they do it by enclosing the entire carby. as long as gravity can get fuel into the bowl (at a certain pressure, yes a pump is mandatory) then the carb doesnt care what its "atmospheric pressure" is at.
ie, the bowl is just as pressurised as the intake, blah blah, venturi effect still works fine.
but it IS pretty stupid doing it on a twostroke unless you have some nifty way of shutting off the exhaust port before the transfers. ie, blower are for 4 strokes and anyone that says otherwise hasnt considered fuel efficiency. sure, you might gain 10% power...at the sacrifice of half the fuel economy. better to focus on other areas that utilize the fuel EFFICIENTLY rather than blow it out the exhaust pipe. unburnt fuel in the exhaust doesnt make power.it just costs money and gives everyone lung cancer.
a very rich man near us (who didnt need to work) said he had sold a patent for a twostroke "turbo" to some company for an undisclosed sum.
all he was allowed to say was it worked more like a diaphgram pump/heart than a spinning compressor. ive never been able to find a reference to it anywhere so it could have just been macho man dribble and he didnt want anyone to know he had won the lottery or something.
back to the real question.
i tried one of those silly ebay kits, more just so i could have a handy NOS dispenser :wacko: rather than sticking it on an engine... so much easier than inflating a balloon... so when i did install it, the only idea was that it should enter the intake via its own mini "carby" with adjustable jet on both fuel flow and nos flow. therefore being able to keep mixture correct without adjusting the real carb itself. halfheartedly modified an airbrush...
this way you can trickle the stuff in, only gain a little bit, but sustain that bit extra for far longer...
dumping the whole thing in the space of ten seconds is just going to break things.
ever tried blowing some through a plain old lighter? they become the equivalent of a blowtorch...nice blue flame and the (brass, Bic) shroud melts
i always say a mikuni type carb with the piston choke is the best type of carb for doing it, drill out the choke jets to suit and put up with no choke for starting.
the pit bike blew its head gasket and that was the end of the experiment... was awesome for all of five minutes though
i then disposed of the rest of the bottles in a responsible manner...
its really too expensive in my opinion to be of any use, and the effects are brief. though i was finding 100 packs from hospitality supplies for quite a reasonable sum.
:rolleyes5: mmmm, laughing gas.... :wacko:
try hydrogen peroxide..., 6% is good, 50% requires a "hazardous goods" courier....thats all i am going to say
, besides that its street legal EVERYWHERE cus the law only ever considered NOS.
so no. nothing definitive, but i would stick my nose up in the air if offered any kit from a vendor to try out. as usual.
theres the drawbacks...it costs a fair bit, it doesnt last long, you have to keep the ideal stoich ratio. you cant overdo it or everything melts/shatters/breaks...