Engine won’t start ??wheel moving freely, Tachs out too fast on 80cc engine

[Amwicr]

No the two issues aren’t related

Really? cos if the motor wouldn't engage when you dropped the clutch, it would mean the clutch is too loose....And if the rpms are rising faster than the bike is accelerating, it sounds like the clutch may still be slipping.

 

[Motobukemam]

Well honestly I’m not
Sure i
Just know
That I always thought it reached high rpm to fast since I got it…and the other issue is fixed but I’m still revving high

 

[Motobukemam]

Really? cos if the motor wouldn't engage when you dropped the clutch, it would mean the clutch is too loose....And if the rpms are rising faster than the bike is accelerating, it sounds like the clutch may still be slipping.

I loosened this bolt and it started working again

 

[Chainlube]

Well honestly I’m not
Sure i
Just know
That I always thought it reached high rpm to fast since I got it…and the other issue is fixed but I’m still revving high

Spray down the connection between carb and manifold, and then manifold and cylinder with some water, if the engine stalls out, you have an air leak,

 

[Motobukemam]

Spray down the connection between carb and manifold, and then manifold and cylinder with some water, if the engine stalls out, you have an air leak,

 

[Chainlube]

View attachment 203317


I loosened this bolt and it started working again

Can we get a picture of the arm with the cable through it?

 

[Motobukemam]

lol yea it looks like hell but it works and my high rpm problem was before it oooked like this

 

[Motobukemam]

 

[Chainlube]

Your carb is broke.

 

[GW's Motorized]

Looks like you need a new clutch cable and to follow the clutch adjustment guide I posted earlier