ok carb slide. the brackets that came with the kit do not fit the frames tube ok. I have had to seal the pit cock with seal all since it was leaking but thats not a problem anymore. cause the treades did not fit the gas tank. i had the black box there wired to the kill switch. i have enough mech exp with cars a trucks that all i need is a few suggestions as to what you are saying here after all i have rebulit a iroc tranny and been though enough training, to not run a bike like the pics. i mean it not like i just got off the bike and took some pics. com on man. the two wires hanging from the engine are suppose to be for a head light, and the black box going to the spark plug have a blue and black wire both for the kill switch, it not related to why the bike will not go. the box was wired to the yellow button,(kill switch) but didn't matter the bike would still not go.
ever heard of making a longer strap for the gastank?
you come on here asking for help then get your panties in a knot because YOU hooked it up wrong and it wont run.
GROW up if you want some help.
If you were that good of a wrench your bike would run... guess what bud... it don't so your not that good.
drop your attitude and you might just learn how to make the motor run.
learn to use the SEARCH on this site everything you asked has been covered many times.