For Sale Grubee 4G trans for mounting on the honda or HS142 [honda clone] with 5/8" output shaft. Good shape. 5 to 1 ratio 11T free wheel output drive sprocket. Bushing has been replaced with a true oil lite bushing that works much better than the stock bushing that went bad. One of the 6 little screws that holds the cover on is missing other than that all parts intact. If you live in a hilly area then this setup is for you. It climbs really well with a 48T sprocket.For a faster cruise speed a 44T will work but climbing will be affected. With the 48 cruise speed was 19mph with top speed around 27.Since I used the Grubee HD axle on my bike I will include a never used 56T sprocket and never used rag joint. I'm going back to my grubee stage 111 with intentions of installing a SBP shift kit. . I accept pay pal. PM me if interested
Last edited by a moderator: