Use a 4 stroke engine mount like this.I picked up this 49cc 2 stroke off a mini chopper. It comes with it's own metal engine mount. I am just trying to figure out how to attach the mount to the bike. Here is a picture of what I am trying to do. Any suggestions will be appreciated...Dan
Those mounting plates come in all the 50 cc 4 stroke kits and work on theThanks for the link on the V frame mounting plate. I don't see how it would connect to the bars or any size for it's length.
The gearbox is included in the engine. One gear with centrifugal clutch. Capable of bringing a mini chopper with smaller wheels to 40 MPH. This engine comes with pull start, centrifugal clutch and electric start. http://elescooterparts.com/parts/gas/GS-12/GS-12Engine/49_5Engine.html I traded another 200cc Longshen engine straight across for it.
Also, if your motor has the starter/generator on it, it's going to be VERY wide, frame-mounted... Gonna leave you bow-legged!
Because of their width, these motors are typically found in rack mounts.
That 5 to 1 ratio gearbox reverses the direction of rotation for the engine so
your CCW engine would be rotating clockwise.
You must be looking at it from the other side.When I pull the starter it rotates counterclockwise. Maybe I didn't catch what you meant in the quote MotorBicycleRacing.
Dan