Pull Start

I just realized my cranks are going to be in the way. That's lame. I really only need it so I can troubleshoot my engine. Instead of killing myself push starting the thing. I'll use it to get my engine running again, then I'll take it off.
 
Be prepared to replace the pull cord, they break easily!
Yeah so I've heard lol. Every review on Amazon etc said the same thing. Said it broke on 2nd pull etc. Hopefully if I don't over extend it, maybe it will last longer.
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
I was going to tell you how to get past your cranks. It’s really a pain but you could make it a home spot on motor . I just need a pic of your engine on bike there’s some options. Like raising motor on frame or raising motor and tilting a bit. Now your chain might need to be taken off or trying it with chain it might even tighten chain too.
 
I was going to tell you how to get past your cranks. It’s really a pain but you could make it a home spot on motor . I just need a pic of your engine on bike there’s some options. Like raising motor on frame or raising motor and tilting a bit. Now your chain might need to be taken off or trying it with chain it might even tighten chain too.
 
See you’re good you can move motor around plenty of room . Just you got the stock exhaust to work around there’s plenty to move around. I got a bigger exhaust on one side and a off set carburetor intake on other so moving is tight but it worked. The black bike is the one that’s got it on.
 

Attachments

  • 99267414-8101-465D-94B8-A84451E9EC27.jpeg
    99267414-8101-465D-94B8-A84451E9EC27.jpeg
    383 KB · Views: 118
Back
Top