C
Chopper
Guest
Rode the Urban Guerilla to work this morning stopping off halfway to top up the tank.
Previously when filling the Chopper I added the oil AFTER filling with fuel and overflowed the tank, so, learning from my mistakes I added the oil first, then topped up with fuel.
Problem (I think) is I left the fuel tap on... could the oil have caused the motor to not want to run? It started fine at the servo and idled nicely while I put my gloves etc back on, but less than a minute later while rolling downhill it cut out and won't start again!
I've pulled the plug and it looks pretty dry and brown, but the clip is set on the third slot down.
Anybody have any ideas what's up?
Previously when filling the Chopper I added the oil AFTER filling with fuel and overflowed the tank, so, learning from my mistakes I added the oil first, then topped up with fuel.
Problem (I think) is I left the fuel tap on... could the oil have caused the motor to not want to run? It started fine at the servo and idled nicely while I put my gloves etc back on, but less than a minute later while rolling downhill it cut out and won't start again!
I've pulled the plug and it looks pretty dry and brown, but the clip is set on the third slot down.
Anybody have any ideas what's up?