drill the hub, is it safe?

N

nachosavage

Guest
hi.

i'll like to know if it is safe to drill the side to the hub to directly attach the sprocket to it (using spacers/adaptor to keep the right distance.

it's a stingray back wheel.

greetings. Nacho
 
Last edited by a moderator:


azbill

Active Member
Joined
Dec 15, 2006
Messages
3,721
should be no problem

it should be ok because the schwinns have a very wide hub.
the adapter from livefast motors attatches this way
 
A

azvinnie

Guest
nacho if you use the hub from livefast "sproket adapter" it will work fine. i have been using mine for 3 months, and never had a problem. im going to pickup another hub sproket for my spare stingray wheel and gonna use a 32 tooth sproket. l just wanna see how fast this bike of mine will go!!!!. talk to ya later
 
Thread Status: Hello , this thread is over 3 years old. You can still reply if relevant, but sometimes it's better to create a new thread to get more replies!
Top