skyliner70cc:
i don't type so good & i struggled to post this. fast answer i cut a section out of manfold & welded it back on angle. i work in machine shop. i did some more things too. why don't we swap phone #'s & e-mail? i wiill post some pictures later so others can see. have some ideas on the light too but need help. jerry 931 684 2976 jepigg@bellsouth.net
i machine 1/2 inch off rear mount & ground some out of front mount with air grinder to let motor down in frame further. i cut 3/16 out of the manifold & ground it of on about 15 degree angle & welded together. tank has the original strap on front & a dab of silicone rubber on rear. should have moved tank forward about 2 1/2 inches. removed gear change - don't need it anymore. i also removed the throttle adjuster from top of carb & elongated the hole so metal end of outer cable would go down in there.
walmart had the white walls. the seat & luggage rack. fenders from ebay.
need more?
read the file names!