sherron82
Active Member
Can someone explain to me exactly how to do a key way on the adapter? How to make my own if necessary
Because if for some reason it slips, it can rip apart your spokes.Can someone explain to me exactly how to do a key way on the adapter? How to make my own if necessary
The best way is with a roll pin, drill a hole into the hub and a hole right through the adapter and tap the pin in. You can get them at a local parts store.Can someone explain to me exactly how to do a key way on the adapter? How to make my own if necessary
In here he sands, any idea what grit sand paper would be good for sanding down the aluminum hub adapters?
There is always one rule you need to know when building these bikes...Almost nothing on these goes right on right out of the box.Is there a sprocket/adapter that would fit without the need for modifications? Anyone know?