Need bolt help

Willbe76

New Member
Joined
Aug 26, 2018
Messages
13
Need to change out my drive sprocket. Some of the teeth broke. Did the work got it changed. The problem is the nut keeps backing its self off. I was wondering if it has to be torque down to fix the problem im having
 


Will'smotobikes19

Well-Known Member
Joined
Apr 9, 2018
Messages
1,658
Ok I wasn't sure thats why i thought i would ask. Is that something i can pick up?
Ya and you have to torque the nut and loctite. Put a penny between the gears and tighten the nut. Inspect the shaft for damage. Could have just been a deffective sprocket or maybe the output shaft is bent. If the key looks damaged replace it. Never heard of that problem before. My chain would kink inside the area under the cover but I had the tensioner on wrong.
 

Willbe76

New Member
Joined
Aug 26, 2018
Messages
13
Ok I wasn't sure thats why i thought i would ask. Is that something i can pick up?
Ya and you have to torque the nut and loctite. Put a penny between the gears and tighten the nut. Inspect the shaft for damage. Could have just been a deffective sprocket or maybe the output shaft is bent. If the key looks damaged replace it. Never heard of that problem before. My chain would kink inside the area under the cover but I had the tensioner on wrong.
 

Willbe76

New Member
Joined
Aug 26, 2018
Messages
13
Ok yeah this started when my chain broke and got wrapped around my rear tire and locked up the chain. Thats how the teeth broke off
 
Top