I have a simple but excellent 12V lighting system, with bright lights front and rear. Yesterday I completed my brake light, rigging a bright red led to a simple 12V battery pack (4 AA batteries) to a simple switch attached to my rear brake lever. I soldered a metal spring and attached it to the throttle body with a small zip tie. I soldered a small metal washer and attached it to the brake handle. Another zip tie leads the washer to the spring when I squeeze. Simple and effective.
My financial situation is expected to be much better next year and my thinking is to buy a small motorcycle. But I have one more motorized bicycle idea:
I have a 140cc 4 stroke, taken from a lawnmower. I intend to convert it for horizontal use, welding on a oil slapped and closing and opening some holes. Should be very reliable. Would have to grind the drive shaft down from 7/8” to 3/4” for a chain driving centrifugal clutch.
I just snagged a motorcycle triple tree stem for a few bucks! I have a couple of nice springs that will fit the big tubes needed for the project so I am foreseeing a kind of plunger tube within a tube. I can make that work by chopping a headtube off a derelict steel bike and welding it to a cafe racer frame of my own design.
Researching pieces, I see that motorcycle fork tubes are very expensive.
I’m thinking that I can rig all this up, add all lights and mirrors and get a motorcycle tag. Has anyone done this?