No start

[Chainlube]

Most of us on here help people all day long 7 days a week so any problems just ask. Stick around on the forum you will learn a lot. I started just like you.

What happened to the avatar?

 

[Chainlube]

Don't have Allen key for magneto cover
View attachment 105778

It needs a little dollup of grease between the two gears. Not much, don't want to get it on the pads.

 

[wan37]

It’s was the a picture of my white bike with the older stuff on it. Didn’t have a picture of it on desktop it’s on my phone.

 

[Kool Ranqe]

Side note, how do I get this off?

 

[Kool Ranqe]

Alright well, clutch issue fixed but the bike only started once for about 20 seconds. Now it doesn't want to start at all. Choke or not. Throttle response does nothing and the throttle won't go any tighter either.

 

[Kool Ranqe]

What do I do guys. Serious im stressing the f*** out. I work tomorrow and it's a 2 hour walk in 120 degree heat with no shade if I don't get his working

 

[Chainlube]

Did you examine the float in your carb? You have the engine tilted to far back, so the fuel level is going to be off. Try to get the carb as level as possible.

 

[Kool Ranqe]

Still doing the same!e things even with the carb being level

 

[Kool Ranqe]

Still doesn't start.

 

[DAMIEN1307]

Still doesn't start.

I see the white wire in a loop outside of the magneto compartment...its not by any remote chance touching metal and grounding out on you, is it ???...DAMIEN