B
Bertsimon
Guest
Hi I am new to this stuff I ve had my bike put together now for over a month. I thought I would try the baffel removal I did I removed the screw and broke it off. I then took out the baffel and cut it. But I now Have that hole were the screw was. I have noticed that I may have lost some power from doing this. It sounds like a tin can going down the road also. I am pretty sure my bike is all wornen in also. I took it on a 15 miles journey one day one way. It got really hot and shut down on me once there. I let it cool down then started right back up. When I got to the place I was riding to it was really hott. So then when I was there I removed the baffel and the ride home was a little quicker. I didnt ride it for awhile after that maybe like a few days. I now have noticed a loss of power. Can anybody help me out with this. Did I burn out the motor already. I have been mixing my gas at 25.1 should i go with more gas less oil. I have burned about 4 tanks worth of gas threw it already. Another thing is how do i stop the gas leaking out of the carb. Such a cheesy clamp holding that thing on it leaks. I have tighten that thing all the time. Also were do I get a gasket for the right side of the motor were there are five screws cause that fell apart has i went to grease it. How do I get my back tire to not wobble also? I know that is a lot right off the bat but if anyone has any ideas for me that would be great. Thanks My bike is the exact one Dac has for a photo on ebay the shorewood cruiser. That is also were I got the motor from.