Will the bike engine fit?

[newuser3466]

I put a motorized bike kit on a bike but it was a really tight fit and carb is too much at an angle and fuel line it going up and then down so it only goes 22mph top speed. I’m going to buy another bike to put the engine on since my current bike is too small. The first pic below is my current bike. The second is the one I’m considering buying. Can someone let me know if the engine and carb will fit on this bike without being at such a big angle

 

[darwin]

Looks like it will fit perfectly. Measure twice then cut [buy the bike]. If you fit it in the 1st bike, the second will be gravy for your skills.

 

[newuser3466]

Looks like it will fit perfectly. Measure twice then cut [buy the bike]. If you fit it in the 1st bike, the second will be gravy for your skills.

What do I measure and how much should the measurements be

 

[Axl Myk]

If you have to ask that, this is going to be a long thread.

 

[newuser3466]

If you have to ask that, this is going to be a long thread.

Do I measure from crank arm to seatpost?

 

[newuser3466]

Do I measure from crank arm to seatpost?

If so I think it’s 20 inch

 

[cloakedvillain]

If so I think it’s 20 inch

If it can fit a 7 by 7 inch cube it can handily fit a 66cc engine.

 

[Nickt919]

Something to think about….

You already have the engine mounted on your bike. A different intake could level the carb and solve the angle issue.

 

[DAMIEN1307]

The second is the one I’m considering buying. Can someone let me know if the engine and carb will fit on this bike without being at such a big angle

Read my answer about the bike you want to buy as far as its suitability is concerned on your other thread where you asked that very same question.

100cc 2 stroke motorized bike will hardly top 36kmh

He made it fit no matta wat, kudos to OP.

motoredbikes.com