M
McCasian
Guest
Hello,
My E-Bike just dead. I have 2 E-bikes so I tested every part. Akku's are good, brushless motor is working well, but the controller does not supply enough voltage to the motor. Maybe the mosfets are dead, but it is very very dificult to extract the board from the case because of the chinese "seals"; I'm afraid to broke the board.
My bike is running on 24V, but I didn't found any controller for 24V / 26". My controller is KZQW22A-MIFA DC24V / 26' and I found a lot KZQW22A-MIFA DC36V / 28'.
If I buy the 36V controller, will it work on my 24V system?
My E-Bike just dead. I have 2 E-bikes so I tested every part. Akku's are good, brushless motor is working well, but the controller does not supply enough voltage to the motor. Maybe the mosfets are dead, but it is very very dificult to extract the board from the case because of the chinese "seals"; I'm afraid to broke the board.
My bike is running on 24V, but I didn't found any controller for 24V / 26". My controller is KZQW22A-MIFA DC24V / 26' and I found a lot KZQW22A-MIFA DC36V / 28'.
If I buy the 36V controller, will it work on my 24V system?