Any help would be great

[CBost922]

Need some help here. Okay so I need some help looking for a sprocket that would fit this hub on my Mongoose Argus ST Fat Tire Bike. Engine is mounted on but ran into an issues with this sprocket it basically doesn't fit. Now I've searched everywhere and can't find one that has a 2" diameter. I also need about two to three inches for the hub there's a hub is about 3 in so any help would be great if you have a Fat Tire Bike and you have mountain and 80cc engine on it please message me and some tips of finding out how I can do and get this bike up and running on the road you can DM me you can reply to this any help would be great!!

 

[HumanPerson]

Msg @Don_Parsons

He has built one like that recently.


Good Luck & Ride Safe!

HP

 

[Hippielives69]

if the problem is at the sprockets hitting the frame I had to stretch the opening for clearance and run a few washers inside on the axle.dont be afraid to bend the frame open a bit it won't afect stability or handling any ..use a hub clamp style sprocket mount and make up any space you need with shims .