A Alson Member Local time 8:58 AM Joined Jun 13, 2010 Messages 44 Jun 28, 2010 #21 slide problems What I was trying to say, the cap was warped, and I put it on the new stock carb, and I think I worped it, the body a little
slide problems What I was trying to say, the cap was warped, and I put it on the new stock carb, and I think I worped it, the body a little
S Swapnil Guest May 15, 2016 #22 Use two stock springs. That always work. You are probably using a quick throttle. Use two springs the carb.
Use two stock springs. That always work. You are probably using a quick throttle. Use two springs the carb.
F Fabian Well-Known Member Local time 12:58 AM Joined Sep 8, 2009 Messages 4,485 Location Australia - Melbourne May 18, 2016 #23 If you over tighten the top of the carburettor, it crushes the top of the carburettor ever so slightly, which then allows the carburettor slide to stick in the carburettor bore at full throttle.
If you over tighten the top of the carburettor, it crushes the top of the carburettor ever so slightly, which then allows the carburettor slide to stick in the carburettor bore at full throttle.
