chain drive kit for honda gx35 engine beside staton kit

Discussion in 'Frame Mounted Engines' started by chanseria, Jun 28, 2014.

  1. chanseria

    chanseria New Member

    hello forum
    i was wondering if there is any chain drive kits around the internet for sell i know there is staton but was looking for cheaper alternative.
    thank u i have the engine honda gx35.
    your suggestions is much appreciated.

  2. Bonefish

    Bonefish Member

  3. HeadSmess

    HeadSmess Well-Known Member

    my first thought exactly.

    belt drive is good too. v belt allows for a slip-belt clutch, which reduces width ;) and you can remove the starter, thats a few more inches gained in width...

    ie, ride some kits and you will get an idea of why im so concerned about this seemingly insignificant issue, width...
  4. drbob

    drbob New Member

    I would recommend you go with the Staton kit. I have one and it has proven to be trouble free for over 9 years. I do not know how many miles I have on my bike but I would guess way more than 10,000. This is a well built kit. Talk to David and see if you can just buy the gearbox only and use your own engine. This will save you lots of money.
  5. drbob

    drbob New Member

    I just checked the staton site and you can get the gearbox only for $176.50
  6. HeadSmess

    HeadSmess Well-Known Member

    i just checked the staton site and you can get 39 lb of pecans for 65 dollars!!!!!!

    seriously....right down the bottom ;)
  7. drbob

    drbob New Member

    funny boy.