Chain install

[Carcher]

Area where the small sprocket is where the chain also touches. I have a clunking sound but I don't see the chain jumping at any point . Sprocket has 10 teeth it's also a 66cc Chinese motor it clunks after a full rotation

 

[Chainlube]

Chain could be contacting the frame, fender or tire. Got any pictures?

 

[DAMIEN1307]

Area where the small sprocket is where the chain also touches. I have a clunking sound but I don't see the chain jumping at any point . Sprocket has 10 teeth it's also a 66cc Chinese motor it clunks after a full rotation

Chain could be contacting the frame, fender or tire. Got any pictures?

It could also be that the chain is just slack enough where it is catching very slightly on the small sprocket housing, that happens quite often when it has too much chain slack...In many cases it can damage the housing where chunks of it will break off if not corrected by shortening the chain.

 

[Carcher]

Chain could be contacting the frame, fender or tire. Got any pictures?

Thank you for your answer I'm checking all the above. don't have a smartphone for pictures either

 

[Chainlube]

Thank you for your answer I'm checking all the above. don't have a smartphone for pictures either

I often use my EOS for pictures, especially when I'm in the shop. It has memory card that just slips into the 'puter.