J
jumpin joe
Guest
To adjust a T-50 engine you have two adjusting screws on the side of the carb. You also have 1 idle screw(press on throttle handle and look at the carb for screw location) adjustment on the other side of carb. You use a flat head screwdriver to adjust all while its running. adjust the idle screw out 1/4 turn to left until u reach desired idle, but that is only after u have the other two fuel adjustment screws on other side of carb adjusted correctly for it to crank and run. you just have to set aside an hour or so to play with it. I payed a dollar for mine and put 40 into it. (gas tank and trimming head)
