BountyHunter
New Member
- Local time
- 7:01 PM
- Joined
- May 13, 2018
- Messages
- 4
Hey guys, first post so excuse me if this is in the wrong section.
I'd say this engine has around 1000 or so km on it, and since day one I've had fuel/oil dripping onto the engine, not sure if it is from the spark plug, exhaust or crank case but I have made sure all is tight. The bike goes great but when I rev it it takes a second or so before it stops revving. My drive sprocket (the one on the motor not the rear wheel) seems a little too tight, but it could be gunk build up. Sorry for the overload, let me know if I should have posted this somewhere else.
Thankyou for reading.
I'd say this engine has around 1000 or so km on it, and since day one I've had fuel/oil dripping onto the engine, not sure if it is from the spark plug, exhaust or crank case but I have made sure all is tight. The bike goes great but when I rev it it takes a second or so before it stops revving. My drive sprocket (the one on the motor not the rear wheel) seems a little too tight, but it could be gunk build up. Sorry for the overload, let me know if I should have posted this somewhere else.
Thankyou for reading.