carrot_top
Member
- Local time
- 10:39 AM
- Joined
- Nov 4, 2008
- Messages
- 58
hey everyone...im working on a schwinn stingray build, though still in the begining stages...im going to be using an 80cc motor kit bought from ebay...though due to the stingrays large tubes, im going to have to make a motor mount....after a quick search i found this thread: http://www.motoredbikes.com/showthread.php?t=15904&highlight=schwinn+stingray ...the video in it shows the mount he used...im going to try to make one similar to that...although instead of bolting right through the frame i was thinking of using U bolts (going to try to avoid drilling in the frame as much as possible....for structual reasons)...
although welding the two tubes to the mount may be somewhat difficult as i dont have access to a welder...im going to see if i cant find anyone who does.....
besides that everythign else should be pretty strait forward with this build...it may take a while though...
heres a pic of the bike in its current condition (pretty much stock except the clutch lever and left grip have been put on..)
although welding the two tubes to the mount may be somewhat difficult as i dont have access to a welder...im going to see if i cant find anyone who does.....
besides that everythign else should be pretty strait forward with this build...it may take a while though...
heres a pic of the bike in its current condition (pretty much stock except the clutch lever and left grip have been put on..)
Last edited by a moderator: