SHOW US YA OCC(stigray)CHOPPER

ill start it off im from sydney Australia and heer is mine ,i would like to see what other guys look like

 

[eltatertoto]

here's mine. 2 words for mounting with the existing tank hardware. molly bolts

 

[levsmith]

here's mine. 2 words for mounting with the existing tank hardware. molly bolts

hey i was just wondering if you can post a closeup picture of the molly bolts. im not really sure what they are but i definitely need a better way to mount my tank. thanks

 

[eltatertoto]

ya drill a hole in the frame/middle of the bracket, turn bracket upsidedown, so is going the same way as the frame, stick the molly bolt through both and screw. it opens up the fins, and clamps to the inside of the pipe. see link for pic

put this through
http://upload.wikimedia.org/wikipedia/commons/f/f8/Bolt_molly.jpg

then screw down
http://img2.timeinc.net/toh/i/a/repair/hanging-05.jpg

 

[BigFella]

THIS is how i mounted my tank its easy and looks cool as well,i turned the brackets upside down and rivited them to the tope of the frame

 

[eltatertoto]

i did the same thing but the cheap way lol.

 

[levsmith]

THIS is how i mounted my tank its easy and looks cool as well,i turned the brackets upside down and rivited them to the tope of the frame

wow that is nice looking. i may have to do that. i think my dad has a rivit gun. the problem is, i dont think i have the brackets anymore. it shouldn't be too hard to make some though. thanks for the idea.

 

[mechanicojoe]

heres my occ gone now

heres my occ. its been taken apart to be repainted and repowered with a honda GX160.woo fast

http://i535.photobucket.com/albums/ee352/mechanicojoeo/2008_0817toronto0005.jpg

http://i535.photobucket.com/albums/ee352/mechanicojoeo/2008_0817toronto0004.jpg

http://i535.photobucket.com/albums/ee352/mechanicojoeo/2008_0817toronto0003.jpg

http://i535.photobucket.com/albums/ee352/mechanicojoeo/2008_0817toronto0002.jpg

http://i535.photobucket.com/albums/ee352/mechanicojoeo/2008_0817toronto0001.jpg

http://i535.photobucket.com/albums/ee352/mechanicojoeo/untitled4.jpg

 

[BigFella]

coooooooooooooool guys its great to see some cool choppers

 

[MotorMac]

Nice!!

Nice setup Mechanic Joe, you did a great job! I like the way you have your CDI switch with ignition key setup in a box. NICE!!

 

[wheelbender6]

Did you guys have to cut or weld the frame to mount the engines? Does using a motor
plate prevent the need for cutting or welding? I was considering building a motorized chopper bike but I'm not a welder.
Did you have to make those long, custom exhaust pipes or is there a vendor that sells them?
Thanks