Throttle cable?

[196cctrike]

Measure in millimeters.

I shipped it back already. But I wasn't able to hook it into the carb at all. The tip was right at the end of the outer housing.

 

[196cctrike]

This is what I had: https://www.amazon.com/dp/B07MC7NSHS/ref=cm_sw_r_apan_i_QVNNRB88NCVXA6NY64XD?_encoding=UTF8&psc=1

 

[DieselTech]

Ok this is what I'm referring to, when I say free cable, this one is 120-125mm of free cable. Notice how twist throttle nub is pulled tight against housing & all cable slack is now at the carb end.

 

[196cctrike]

Ok this is what I'm referring to, when I say free cable, this one is 120-125mm of free cable. Notice how twist throttle nub is pulled tight against housing & all cable slack is now at the carb end. View attachment 176030

I had the cable attached to the twist throttle and the other end was right at the tip of the outer housing.

 

[DieselTech]

If you run a straight throttle cable end like this at the carb, you will need 95-110mm of free cable. If you need to run a 45°-90°degree throttle cable end at the carburetor you will need a free cable length to be 110-130mm long.

 

[196cctrike]

This is what I have.

 

[196cctrike]

Are you supposed to hook up at the twist throttle first?

 

[DieselTech]

Are you supposed to hook up at the twist throttle first?

Right wrong or indifferent, I always hook to carb 1st. But that's just me. That looks like a pz19 or pz20 carb to me.

 

[DieselTech]

Are you supposed to hook up at the twist throttle first?

If I was a betting man, I would bet on this! I think this is what your looking for? I'm hoping free cable length is long enough, but believe it has 80mm of free cable.

 

[196cctrike]

Right wrong or indifferent, I always hook to carb 1st. But that's just me. That looks like a pz19 or pz20 carb to me.

It's a Mikuni VM22