Ive never mixed accurate parts or ratio and I've used jb weld hundreds of times
I just go by color and never had a problem even when the tube is decades old
Good luck
Ive never mixed accurate parts or ratio and I've used jb weld hundreds of times
I just go by color and never had a problem even when the tube is decades old
Good luck
People add different amounts on purpose to get different cure time results, but their careful not to add too much or too little
Adding a larger portion of white it cures faster.
Adding too much white the epoxy will be brittle.
Adding a larger portion of black it cures slower.
Adding too much black the epoxy will not quite cure.
7 min epoxy is a darker shade of gray than the 4-6 hr epoxy so ya cant go by color
It's all about how much hardener ya add so it should be close to 50/50