Clutch pads

No clue, but I know ABS itself becomes gummy when heated and cracks when heat-cycled.

Curious how they'd work, but I can't imagine them being good.
 
I have a set of the green pads in one of my bikes. They seem to work but not as grabby as the black and white ones I have in an other. The green ones have a softer feel on engagement.
 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
I got to checking my whole clutch setup and noticed that my set screw for the flower nut extends (in my opinion) to far out the back of my clutch plate and im hoping this is my problem
 

Attachments

  • 17105599804304921565693329665545.jpg
    17105599804304921565693329665545.jpg
    122.5 KB · Views: 30
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
I took a large thick steal circle and drilled out the center and 3 stud holes on the clutch plate and have it stacked on top of the clutch plate.
This made A: my set screw level with back of clutch plate.
B: more pressure on the clutch plate and also the pressure is more evenly distributed across the clutch plate (not as much as a second clutch plate would but definitely an improvement)
Ill test it out tomorrow and give an update.
 
Here's what I made
 

Attachments

  • 1710582240478945936587189937949.jpg
    1710582240478945936587189937949.jpg
    176.7 KB · Views: 22
  • 17105823021496534662063551710249.jpg
    17105823021496534662063551710249.jpg
    103.7 KB · Views: 25
Back
Top