Philandra Chambliss
Member
- Local time
- 11:04 AM
- Joined
- Sep 2, 2017
- Messages
- 554
The bike riding with me here is a 50cc with stock gear,stock speed carb,No tuned pipe (expansion chamber)stock stator and rotor,stock cdi and wire with the stock boot also the stock cheap ass spark plug.with a 180 lbs 6ft 2" rider upright holding at 30 mph on grades at 3/4 throttle.WE keep trying to tell you something is not right with your set up, There is no added performance parts on this bike in the video and it's capable of going twice the speed of your's with no issue and no assistance needed to do it!Take the advise so many have given you and find the problem.
THE RETURN OF DEAD REVIVING THREAD TED! lol
well there was we discussed it multiple times the problem was the rings chewed the bore up, one ring was still on the dimple and the other had spun leading to the ring being able to properly seat causing leakage.
Last I just tried to work with the repairs to that block, and when I went to flush the case guess what I found?
"bad magneto side case bearing." the big slowmo was bound to die.