Vtec gas bike
New Member
- Local time
- 1:40 AM
- Joined
- Jan 27, 2019
- Messages
- 8
Hello, i need some help with my bike. I recently cleaned my carb after it giving many problems and ride it too get new break pads a week and a half ago. I rode it up a steep hill going at a moderate speed and then i arrived to my house. I had stopped to intall new break pads which only took 15 mineutes and noticed i had nudged the fuel nipple on my stock speed carb after that its been leaking fuel slightly and will not start. now i replaced the carb and it still does not start and it drips a bit of fuel from the exhaust when i try. i tighten the head bolts, removed the spark plug and it doesn't look any different, unplugged my kill switch wires, and still no start.
Anything helps thanks.
Update: I tried another spark plug and i am still getting no spark what should i replace first magneto or cdi?
Anything helps thanks.
Update: I tried another spark plug and i am still getting no spark what should i replace first magneto or cdi?
Last edited: