Skrondog New Member Local time 1:16 AM Joined Oct 1, 2021 Messages 6 Oct 6, 2021 #21 Skrondog said: No pistons out there made for 10 instead of 12mm? The small end looks like it could handle the 0.5 increase. Where could I get one of those bearings? Click to expand...
Skrondog said: No pistons out there made for 10 instead of 12mm? The small end looks like it could handle the 0.5 increase. Where could I get one of those bearings? Click to expand...
DieselTech Well-Known Member Local time 12:16 AM Joined Sep 18, 2021 Messages 7,108 Oct 6, 2021 #22 The wrist pin bearing I was going to use is a pro-x # 21.7012, also I think this bearing might work if the metal side shields were removed. FG-1232-EE-NADELLA but its $42.
The wrist pin bearing I was going to use is a pro-x # 21.7012, also I think this bearing might work if the metal side shields were removed. FG-1232-EE-NADELLA but its $42.
DieselTech Well-Known Member Local time 12:16 AM Joined Sep 18, 2021 Messages 7,108 Oct 6, 2021 #23 The pro-x brand wrist pin bearing #21.7012 is for ktm 50 sx on certain models & is used in aprilia engines as well.
The pro-x brand wrist pin bearing #21.7012 is for ktm 50 sx on certain models & is used in aprilia engines as well.
DieselTech Well-Known Member Local time 12:16 AM Joined Sep 18, 2021 Messages 7,108 Oct 7, 2021 #24 The pro-x wrist pin bearing # 21.2001 would be better suited for the phantom 85, its dimensions are 12mmx15mmx16mm.
The pro-x wrist pin bearing # 21.2001 would be better suited for the phantom 85, its dimensions are 12mmx15mmx16mm.