Staton friction drive kit

[Will'smotobikes19]

Bicycle Rear Friction Gasoline Engine for 43cc 2Stroke Bike Gas Motorized Engine | eBay

<li> Description:</li> <li>Easy installation- 43cc 2 stroke bike Gas Motorized Engine kit is by far the easiest to install. It does not require disassembly of bicycle parts. It is easy to use, has first-class performance and is compatible with the advantages of ordinary bicycles. It can be used...

www.ebay.com

Does this look like an ok kit? It arrived a few days ago years ago I bought someone a g430rc and Staton kit but never got to try it. The bike itself is still on the way.

 

[darwin]

Spin the clutch drum to make sure bearings are good to go before attaching motor. No major play in/out, spins, feel no grinding or noise. Seems you might need to match a throttle cable to that carb. Other parts look standard to fit.

 

[EnderbyRider]

It has a couple good reviews and it's cheap fun if it's good or not

 

[GW's Motorized]

Looks like a.simple kit

 

[Hunter]

Looks like the same kit that I had from Bikeberry other then mine came with a 38cc Huasheng, As for that engine it looks to be the same one I have on my offbrand Goped it runs good and has some good torque in the midrange I like to lean mine out and hear it scream

 

[Will'smotobikes19]

Spin the clutch drum to make sure bearings are good to go before attaching motor. No major play in/out, spins, feel no grinding or noise. Seems you might need to match a throttle cable to that carb. Other parts look standard to fit.

No grinding that seems like a failure point though. I'm sure there's nachi equivalent bearings just need some snap ring pliers.

 

[Will'smotobikes19]

Seems you might need to match a throttle cable to that carb. Other parts look standard to fit.

It came with a killswitch and twist throttle like the cg kits.

 

[Will'smotobikes19]

The frame came today but a slight problem. The fender mount/brake mount is a weird shape.

 

[Will'smotobikes19]

I guess this is what I get for buying an ebay mountain bike with dual discs. Most brake mounts are a round tube with a hole in the middle but this thing has a triangular notch in the middle and two vertical tabs.

 

[Will'smotobikes19]

So 2 problems actually the bar for the fd kit is blocked by the brake caliper along with those vertical tabs where the rear brake mount should be