agallardo113
New Member
hi people. i left my bike in rain for a few minutes before i got to it to put it away. later i tried starting and it doesnt start. not the magneto or cdi because i weather proofed those. it sounds like the clutch is still a little disengaged even though the clutch is released. like its not turning over at all. kinda sounds like something is grinding inside. its a 2 cycle 80cc chinese motor from bgf. i took the cover off where the clutch arm thingy is attached and took the shaft out of the hole in the center of the sprocket where the chain goes into the motor. a big ball bearing came out of that hole which it never did before when i took that part out to lube it when i first bought the motor. i put everything back and closed it up but still the same. any thoughts would be appreciated.