jumpjr619
New Member
- Local time
- 10:17 PM
- Joined
- Oct 22, 2022
- Messages
- 18
So I'm working on a motor for a friend and first thing I noticed was it was easy to push the bike without holding in the clutch. Since I knew he needed a bucking bar I thought this was weird. So I replaced the bucking bar and bearing and put semi new clutch pads in and still same issue I pulled the jug off and saw he was missing his piston rings. My concern is why there is so little resistance in the wheel and why isnt the clutch plate moving away when I engage the clutch. When the plate is off I can visually see the bolt that the wing nut is on moving slightly but when the wing nut is on with the plate I can't see the plate move away to disengage the pads please help