HT Motor + Shift Kit + 6V/12V generator

[gothicguy64]

im happy to see u finally have ur lights but no reg just yet .
yes i have my bike its a esperia ..eagle 20.5 inch frame 21 spd
bad news is down tube is 51 mm ...
it is allot frame an has australia on it so why buy it i said besides cell have a 7 day delay on there mtx1 ..
mines from bikebarn parra ..$350
so far i got a tarmac rear tyre from kmart cost 5 bucks yes 5 ...
its 26x 1.95 an 5 dollars ..
next is the engine transfer after i get a new pr of grips .http://www.motoredbikes.com/images/smilies/set12_b/helmet.gif



brad
syd

 

[AussieSteve]

Howdy Brad. My downtube is the same size. A 1½" muffler clamp fill fit perfectly. (I used a pair of them to attach the battery box.)
Not sure what's available in Oz, but I'm almost certain that SBP sell a front mount to suit.

This headlight is great, but it's annoying having to manually charge the battery after rides. Can't wait to get the generator working.

 

[gothicguy64]

ummm 50 mm is 2 inch,s ...

i emailed jim kit should fit even tho my clutch arm an cover are billet an cover stands 2-3mm pround but axle is more than long enuff to handle a extra 3 mm .
so when my tax arrives in spendin it on a hd 2 kit .exhaust , low profile air filter.






brad

 

[gothicguy64]

ohh i forgot the rear tyre is a cyclops road trye 26x1,95 but i got the last 1 from parra k-mart or i would of gotten all they had ...
my rse front disk wheel fits so does my gasman caliper its trye is a swinn 26x1.95 (cruiser ).
i added a 4 dollar mirror to right side bar plus my old aldi speedo it has a light ..it even has a thermo an calories lol ..
old did 2500 km
lets see if i get to 10,000


brad

 

[AussieSteve]

S..t, sorry Brad, I meant 2". (The muffler clamps on my head-stem are 1½".)

The bike's sounding good, overall.

A quick point on the shift-kit. If the left-hand side-plate is going to be 3mm further out, one extra jackshaft thrust washer might be needed for chain alignment. (This would move the LHS jackshaft sprocket about 3mm to the right to compensate.)
When you order the shift-kit, it wouldn't hurt to ask Jim for a second washer, just in case.

 

[gothicguy64]

thats exactly what jim said ...lol

 

[AussieSteve]

Great minds think alike.