Just Starting and Need Help Please!

[JimmyNibbles77]

well,

before you turn over the engine the first time, put in some oil in the engine spark plug hole. as these engines arnt assembled with any oil (or a very very light coating of it)

you want to locktite EVERYTHING on these things, as they virbrate a lot and will make stuff come loose. only use blue, not red.

is break it in with 16:1 on the first tank, take it easy on the throttle. then run 25:1 on the second tank, and finally 32:1 (or whatever you chose to run it on) for every tank fill.

watch this video on how to grease the gears on this transmittion, very easy to do and will make it last a very long time.

Thanks for the tips! Will do.

 

[Solux]

Let us know how the install and test ride goes!

 

[JimmyNibbles77]

Let us know how the install and test ride goes!

I ordered one of those cheap engines from china and It has quite the far-off delivery date, but I will let you know when I can!

 

[Rodhead]

Thanks for the tips! Will do.

Try a 41 sprocket good for speed 3 mph over 44 a little slower on hills but climbs good as far as mix Lucas 20/1; 1 tank after that 24/1 never look back expect long engine life and clean burn.